Posted by Wayne Batten on July 15, 2001 at 12:50:50:
In Reply to: Re: Pro 94 - ? posted by Brian D on July 15, 2001 at 12:06:41:
Brian,
IMPORTANT: If you are scanning any system other than a Motorola Type I system, be sure status bit ignore is set to ON or you will miss some transmissions.
Besure the Bank is set for Trunked or Conventional frequencies.
Set the SQUELCH at 12:00
Make sure the Programming steps where followed in the manual. If you dont have a manual I provided a link to one below.
http://support.tandy.com/support_electronics/57321.htm
let me know what you found out.
-wayne
www.ccsfi.com