Posted by Donna on March 07, 2001 at 13:04:56:
In Reply to: Re: Help w/trunking Pro 91 ......Please posted by JJL on March 06, 2001 at 07:50:41:
: : I have become very frustrated trying to program this scanner. I do not understand how to program the trunking, I'm kind of new at this so any help would be greatly appreciated!
: Press PROG then TRUNK
: All 5 banks will flash. Press what bank you want to store the frequencies in (1-5). Enter your trunking frequencies. After you enter the freq press enter. Once all the freq's are entered press search the scanner will display 3 or 5 digit ID's and the scanner will start trunktracking. I usually enter these frequencies.
: 868.425
: 851.087
: 851.162
: 851.362
: 851.812
: 851.962
: 852.112
: 852.612
: 852.862
: 853.312
: 853.487
: 853.612
: 854.087
: 854.287
: 866.362
: 866.387
: 866.937
: 866.962
: 867.337
: 867.437
: 867.837
: 867.862
: 851.937
: 868.450
: 868.700
: 868.675
: 852.762
: 851.362
: 868.825
: 851.062
I had the same problem. After about 5 calls to 1-800 TheShack we figured out that I was to use the
instructions for programming trunking starting in the MIDDLE of the manual.