Re: CTCSS and PL Tones


Posted by B'jouh on December 17, 2000 at 00:04:32:

In Reply to: Re: CTCSS and PL Tones posted by artey on December 13, 2000 at 20:31:37:

The output frequency is the one you want to listen to. The input frequency is the one they transmit on, and the offset is the difference between the two. In programming most transcievers, you input the output and the offset.

Note: Transmitting on these frequencies without proper license and authorization is a criminal offense.

: : Richard -

: : Unless you've set your scanner to only break squelch for a particular PL tone, you should only need to input the frequency once. No matter what radio traffic is broadcast, you'll hear it.

: : A rundown of PCSO frequencies and CTCSS tones, directly from the Pierce County Comprehensive Emergency Management Plan. By the way, this plan is distributed online, so I don't believe the information is meant to be held in confidence.

: : Description Input Freq. Output Freq. Offset CTCSS
: : --------------------------------------------------------------------
: : West Dispatch 154.7100 155.6400 - .930 146.2
: : West Admin 154.8900 155.3100 - .420 146.2
: : East Dispatch 159.0300 154.9500 +4.080 156.7
: : East Admin 158.9100 155.6100 +3.300 131.8
: : Records 156.0900 156.0900 Simplex 151.4

: : B'jouh
: : bjouh@yahoo.ca
: what do you mean /or why the offset column what is that used for?





Follow Ups:



Post a Followup

Name:

E-Mail:

Subject:

Comments:


[ Follow Ups ] [ Post Followup ] [ INTERCEPT WWW BBS ]