In Reply to: rx tx tone/ctcss/pl ???????????? posted by artey on June 30, 2000 at 16:13:28:
: Please if any one has any info in this area I would appreciate a reply. Is LERN open squlch or isit coded? Also any info on tones for DNR,WSP, SNO CNY ETC>>>>>>>>>>> thanks
Go to the site www.interceptradio.com . There you will find a very nice list of tones.(155.650 is 141.3hz)
If you have a Uniden BC 895 you can make quick work of seeking tones by setting the CTCSS function to search during the scan mode. It will stop on the active tone and hold it until the scan function begins again. You can enter it before the scan resumes.
I believe that LERN is 100hz. (Motorola code=1Z) (other areas appear to use different tones)
OSCCR is carrier squelch.
Most all Sno. Co. agencies use 127.3hz (Motorola code=3A)
Air Lift N/W is 192.8hz
PUD is 103.5hz
Cascade Hospital HEAR is 85.4hz
Everett Prov. HEAR is 151.4hz
Colby HEAR is 123.0hz
DNR (N/W Region) 159.240 has five repeaters, all with different outputs. Area "A" is 114.8hz. Area "C" is 118.8hz. etc., etc. Inputs however are not the same. WILDLIFE officers use 159.420 and like the DNR there are a bunch of repeaters with different output tones.