InterceptRadio.com Forums
http://www.interceptradio.com/bbs/

WSP VHF - TRX-1 working, BCD436, not so much....
http://www.interceptradio.com/bbs/viewtopic.php?f=26&t=8760
Page 1 of 1

Author:  nessnet [ Wed Mar 15, 2017 10:42 am ]
Post subject:  WSP VHF - TRX-1 working, BCD436, not so much....

Hoping someone can help me figure this one out....

I have both a TRX-1 and a BCD436.
The TRX-1 is picking up WSP (Washington State Patrol) - the 436 not so much.
This is on the (now narrowbanded/digital) conventional VHF 154-158 freqs.
JIWN (Justice Integrated Wireless Network - trunked VHF) and WSPDOT (WA State Patrol Dept of Transp - trunked 700) seem to be working fine.

These scanners were both programmed via RR database.
Both are using a Diamond RH77, so antennas are the same

I did notice the TRX-1 had FM programmed on the P25/digital freqs (via RR), the 436 had NFM programmed via RR. I changed the 436 where needed to FM on these.

Still hearing nothing.
And yes, it is scanning them freqs, just not hearing anything.
I even turned location off, just in case that was the problem.
Nope...

Any suggestions??

Thanks

Author:  nickcarr [ Wed Mar 15, 2017 3:26 pm ]
Post subject:  Re: WSP VHF - TRX-1 working, BCD436, not so much....

nessnet wrote:
These scanners were both programmed via RR database.

...and why are you asking on this forum and not the RR folks?

Author:  Wilrobnson [ Wed Mar 15, 2017 9:50 pm ]
Post subject:  Re: WSP VHF - TRX-1 working, BCD436, not so much....

nickcarr wrote:
...and why are you asking on this forum and not the RR folks?

He's looking for accurate information?

Author:  Wilrobnson [ Wed Mar 15, 2017 10:00 pm ]
Post subject:  Re: WSP VHF - TRX-1 working, BCD436, not so much....

nessnet wrote:
The TRX-1 is picking up WSP (Washington State Patrol) - the 436 not so much.

Uniden. Enough said.

nessnet wrote:
JIWN (Justice Integrated Wireless Network - trunked VHF) and WSPDOT (WA State Patrol Dept of Transp - trunked 700) seem to be working fine.
JIWN is actually IWN, and WSPDOT is just WSP. IWN dropped the J a few years ago, and WSPDOT is someone's imaginary name. WSDOT has their own 800 system and is working feverishly on a 700 Phase-2 system.

nessnet wrote:
I did notice the TRX-1 had FM programmed on the P25/digital freqs (via RR), the 436 had NFM programmed via RR. I changed the 436 where needed to FM on these.

Not knowing anything about the RR 'database', I'll first ask what NAC codes are programmed in? Then we'll discuss preset squelch settings, etc.

As an aside, on my TRX radios I use NFM or AUTO only (though I don't listen to WSP...or WSDOT).

Author:  nickcarr [ Wed Mar 15, 2017 10:02 pm ]
Post subject:  Re: WSP VHF - TRX-1 working, BCD436, not so much....

Wilrobnson wrote:
nickcarr wrote:
...and why are you asking on this forum and not the RR folks?

He's looking for accurate information?

He's definitely come to the wrong place then...

Author:  TechnoWeenie [ Wed Mar 22, 2017 9:48 pm ]
Post subject:  Re: WSP VHF - TRX-1 working, BCD436, not so much....

Set the NAC to F7E and see if that makes a difference, if the scanner even supports it...

Author:  n7ryy [ Thu Mar 23, 2017 5:20 pm ]
Post subject:  Re: WSP VHF - TRX-1 working, BCD436, not so much....

UNIDEN IZ BEST EVR FER TRAKKIN BEaRZ
Wilrobnson wrote:
nessnet wrote:
The TRX-1 is picking up WSP (Washington State Patrol) - the 436 not so much.

Uniden. Enough said.

nessnet wrote:
JIWN (Justice Integrated Wireless Network - trunked VHF) and WSPDOT (WA State Patrol Dept of Transp - trunked 700) seem to be working fine.
JIWN is actually IWN, and WSPDOT is just WSP. IWN dropped the J a few years ago, and WSPDOT is someone's imaginary name. WSDOT has their own 800 system and is working feverishly on a 700 Phase-2 system.

Feverish? I doubt that, we are talking about the state right???

Page 1 of 1 All times are UTC - 8 hours
Copyright © 2013 Interceptradio.com