InterceptRadio.com Forums • View topic - Trying to listen to Shoreline fire

View unanswered posts | View active topics

Board index » Regional Forums » Washington

All times are UTC - 8 hours

Forums Map Search Database Search Live Audio Alerts Wiki

Trying to listen to Shoreline fire

Moderator: Brad

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

Rodentkj

Post subject: Trying to listen to Shoreline fire

Posted: Mon Jul 25, 2005 11:29 am

Joined: Tue Oct 26, 2004 11:40 am
Posts: 581
Location: Snohomish County, WA

Using a Pro-95

I have programmed in all the trunk channels for (Eastside) EPSCA. And have entered in the TG's for the two dispatch channels and seven TAC channels. So far I have not heard anything.

I must be doing something wrong. Or missed something important.

Top

charlie fox

Post subject:

Posted: Mon Jul 25, 2005 12:34 pm

Joined: Wed Mar 31, 2004 2:04 pm
Posts: 57
Location: MV,WA,USA

If you listen to 154.400 they still "tone out" on this freq, then you can try to find their TG. Shoreline units are "60" series (Engine 61, Medic 64 etc)

_________________
"Lawyers, Guns and Money"

Top

Rodentkj

Post subject:

Posted: Mon Jul 25, 2005 3:47 pm

Joined: Tue Oct 26, 2004 11:40 am
Posts: 581
Location: Snohomish County, WA

Okay thanks. I'll monitor 154.400.

But can anyone confirm what trunk freq and TG is used to listed to Shoreline fire?

Top

Sgt Bilko

Post subject: Here YZou Go

Posted: Mon Jul 25, 2005 4:36 pm

Joined: Wed Feb 25, 2004 8:00 pm
Posts: 56

Here you go:

22384 - Fire Dispatch 1
22224 - Fire Tac 1
22192 - Fire Tac 2
22160 - Fire Tac 3

They can be assigned to any fire tac, the dispatchers choose the tac channel unless the incident commander asks to be switched to a different tac. You will find the complete listing here:

http://interceptradio.com/s.php?sfreq=3 ... l=3D1C&z=1

Top

Rodentkj

Post subject:

Posted: Tue Jul 26, 2005 8:26 am

Joined: Tue Oct 26, 2004 11:40 am
Posts: 581
Location: Snohomish County, WA

Thanks. But I have all of those TG's programmed in already. In addition I have programmed in all the trunk channels for EPSCA and King County. I still do not hear anything. But I do hear the dispatch go out on 154.400.

So I dont know what the problem is.

Top

Sgt Bilko

Post subject: Are You Using The Right Control Channels?

Posted: Tue Jul 26, 2005 4:04 pm

Joined: Wed Feb 25, 2004 8:00 pm
Posts: 56

Shoreline doesn't use EPSCA control channels list below, they are on the King County system.

868.775 EPSCA Simulcast Control Channel
868.200 EPSCA Simulcast Secondary Control Channel

Make sure you are using the King County control channels listed below:

868.4250 King County Simulcast Control Channel
867.8625 King County Simulcast Secondary Control Channel

http://interceptradio.com/s.php?sfreq=1 ... l=3D1C&z=1

Top

Richard

Post subject:

Posted: Sat Jul 30, 2005 6:05 am

Joined: Thu Feb 19, 2004 9:34 am
Posts: 345

Shoreline Fire is dispatched by EPSCA, the dispatch center is located at Bellevue Fire station #3. They dispatch for all of the fire agencies in North and East King County.

You can listen to the King County/ValleyComm system and get some of the talkgroups for the Eastside fire agencies. But I would stick with the EPSCA system, and use the 868.775 as the control channel. It also just depends on which control channel/system you can pick up the best.

Good Luck

Richard

Top

Page 1 of 1

[ 7 posts ]

Board index » Regional Forums » Washington

All times are UTC - 8 hours

Who is online

Users browsing this forum: No registered users and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum