| InterceptRadio.com Forums http://www.interceptradio.com/bbs/ |
|
| City of Kent - Local Govt, Police and Fire - would like the http://www.interceptradio.com/bbs/viewtopic.php?f=26&t=708 |
Page 1 of 1 |
| Author: | Lelles [ Sat Jun 25, 2005 9:46 am ] |
| Post subject: | City of Kent - Local Govt, Police and Fire - would like the |
I am new to monitoring with a scanner and live in the City of Kent. I have a BC245XLT and would like to monitor City of Kent government, police and fire radio activity. Can anyone provide me with various frequencies to scan? Also local railroad activity if possible. THANKS :shock: |
|
| Author: | Kevinc [ Sat Jun 25, 2005 2:45 pm ] |
| Post subject: | |
Kent Police talk groups 37136 Kent PD Primary 37168 Kent PD Tac 37200 Kent PD Admin Fire Department Talk groups (Kent Units are all of the 70"s units) 38448 Fire 1 (Dispatch) 38480 Fire 2 (Basic aid calls) 38512 Fire 3 (Car accidents some fires) 38544 Fire 4 (Big fires or major calls) 62480 Fire 5 (Big Fires or major calls) 38736 Val 6 Fire (major calls) |
|
| Author: | STEVE F. [ Wed Jun 29, 2005 2:44 pm ] |
| Post subject: | |
TRY FOR FD 154.070 |
|
| Author: | eriksdaddy [ Wed Jun 29, 2005 6:03 pm ] |
| Post subject: | Kent Fire |
frequency 1 154.070 frequency 2 154.445 frequency 3 154.310 frequency 4 154.250 There are a whole bunch more but I cannot remember them all right now. Check the intercept frequency database. Nick |
|
| Author: | B [ Wed Jun 29, 2005 7:27 pm ] |
| Post subject: | Re: Kent Fire |
eriksdaddy wrote: frequency 1 154.070
frequency 2 154.445 frequency 3 154.310 frequency 4 154.250 There are a whole bunch more but I cannot remember them all right now. Check the intercept frequency database. Nick The only VHF frequency that is active anymore is .070. The others are no longer in use by Valleycom. To monitor anything after the initial dispatch you'll have to use a trunk tracker and put in the talkgroups listed above. Fire 1 is simulcast between 38448 and 154.070 with only the dispatch traffic coming out on .070. No mobile traffic can be heard on .070. |
|
| Author: | eriksdaddy [ Fri Jul 01, 2005 10:40 am ] |
| Post subject: | pro 94 |
how would i go about entering the talk groups in a pro 94 Nick |
|
| Author: | B [ Sat Jul 02, 2005 5:54 am ] |
| Post subject: | |
The other thing to keep in mind when monitoring the KC/VC trunked system is that you can listen to the simulcast frequencies but there is also the site on McDonald which is stand alone and covers a huge area. Sometimes I have missed snippets of radio traffic and my assumption is because the mobile is grabbing McDonald and not a simulcast site. You basically have line of sight to McDonald from anywhere in S. King County. |
|
| Author: | Brad [ Sat Jul 02, 2005 8:30 pm ] |
| Post subject: | Simulcast vs. Stand Alone |
Radio traffic going through a stand-alone site *should* be routed back through the zone controller and onto the simulcast system - so that the rest of the system users can hear the conversation. Of course, I suppose if all the radios on a talkgroup are affiliated with just the stand-alone site, then the zone controller may not route the traffic back to the simulcast portion. Perhaps Sean can clarify.... Brad. |
|
| Author: | Sean [ Sat Jul 02, 2005 8:56 pm ] |
| Post subject: | |
Traffic will only be routed to sites where it is needed. If there are no units affiliated on the site, why tie up a channel with the traffic ? Just because audio is on one subsystem is no guarantee that it will be on another subsystem. Traffic and resource management at its best. |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Copyright © 2013 Interceptradio.com |
|