| InterceptRadio.com Forums http://www.interceptradio.com/bbs/ |
|
| PRO 97 drops out of trunking latches onto 868.75 conventiona http://www.interceptradio.com/bbs/viewtopic.php?f=26&t=1225 |
Page 1 of 1 |
| Author: | Miguelito [ Wed Sep 20, 2006 2:09 pm ] |
| Post subject: | PRO 97 drops out of trunking latches onto 868.75 conventiona |
This has been a very annoying problem since I got my radio shack pro97. The only work around I have found so far is either to hit "Scan" or lock out the frequency. Has anyone else experienced this, or know of a different workaround for the problem ? I programmed this receiver by hand - I did not use any programming software. Any information would be appreciated. Thanks in advance. |
|
| Author: | Renton [ Wed Sep 20, 2006 7:07 pm ] |
| Post subject: | |
do you have it in MOT mode |
|
| Author: | Miguelito [ Wed Sep 20, 2006 9:59 pm ] |
| Post subject: | PRO 97 scanner |
The scanner display indicates the scanner is in motorola mode. m |
|
| Author: | Renton [ Thu Sep 21, 2006 6:57 pm ] |
| Post subject: | |
make sure your talkgrou bank is set for montrola |
|
| Author: | Miguelito [ Fri Sep 22, 2006 8:55 am ] |
| Post subject: | PRO 97 |
Hi Renton, Thanks. I have Snohomish system in Bank 0 and yesterday went through the frequencies to make sure they were all set to Motorola and that seems to have made the difference. Have a great one :) |
|
| Author: | Renton [ Sat Sep 23, 2006 5:49 am ] |
| Post subject: | |
any time |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Copyright © 2013 Interceptradio.com |
|