| InterceptRadio.com Forums http://www.interceptradio.com/bbs/ |
|
| Motorola system ID's http://www.interceptradio.com/bbs/viewtopic.php?f=1&t=9253 |
Page 1 of 1 |
| Author: | Blackhawk350 [ Mon Feb 03, 2020 1:16 pm ] |
| Post subject: | Motorola system ID's |
Motorola system ID's are usually in the format of something like "7Axx" for example But is it possible for them to be in any other format such as only 3 digits and no letters? |
|
| Author: | dste [ Mon Feb 03, 2020 4:11 pm ] |
| Post subject: | Re: Motorola system ID's |
3 digits or characters would be a P25 system. Like the new WSP 700 system is now 9CC. 4 digits are the older analog/digital systems. |
|
| Author: | Blackhawk350 [ Tue Feb 04, 2020 4:19 am ] |
| Post subject: | Re: Motorola system ID's |
So that would be only a fully P25 system? Because i understand that some Motorola analog/type 2 or whatever systems can have P25 capable talkgroups on them Whats happening is i am receiving a weak Mot control channel and when i sit on the control channel to try and get a system ID it just reads "ID: xxx " Whereas usually when a system ID is decoded it will show "SID:xxxx" so i am also thinking this could be some type of error due to the weak signal |
|
| Author: | ecps92 [ Tue Feb 04, 2020 11:46 am ] |
| Post subject: | Re: Motorola system ID's |
Exactly, here in MA we have One Network, with the ole Type II running as 0D14 and the P25 running as D14 0D14 is analog with a few P25 TG's which are allowed on only a handfull of Talk Paths dste wrote: 3 digits or characters would be a P25 system. Like the new WSP 700 system is now 9CC. 4 digits are the older analog/digital systems.
|
|
| Author: | cparris2 [ Wed Feb 05, 2020 1:19 pm ] |
| Post subject: | Re: Motorola system ID's |
The three digit hex System ID's are usually assigned to true P25 systems using a P25 9600 baud control channel. The four digit System ID's are assigned to Motorola systems. They may have some digital talk groups but are not broadcasting a true P-25 control channel. Harris system P-25 ID's are three digits as well, but are often not unique. They seem to use a default system ID of 00A a lot, but with different WACN. -CP |
|
| Author: | Blackhawk350 [ Thu Feb 06, 2020 11:28 am ] |
| Post subject: | Re: Motorola system ID's |
Makes sense - must have been some type of error due to the weak signal Thanks |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Copyright © 2013 Interceptradio.com |
|