InterceptRadio.com Forums http://www.interceptradio.com/bbs/
Help - what am I doing wrong? http://www.interceptradio.com/bbs/viewtopic.php?f=1&t=9071	Page 1 of 1

---

Author:	olowy [ Thu Oct 11, 2018 11:37 am ]
Post subject:	Help - what am I doing wrong?
My work has a Motorola XPR 3500 with I believe two channels. I also have a uniden BCD437HP with all the firmware upgrades. There are two crews listed which are both are 458.6750. Both are listed as having 1 Ant, and 1 freq id. I have tried to program through the mototrbo but i cannot get it to work. I know in the past this type couldn’t be scanned but thought with the new uniden upgrades it could be. Am I doing something wrong? Any help would be appreciated.

---

Author:	nickcarr [ Thu Oct 11, 2018 10:43 pm ]
Post subject:	Re: Help - what am I doing wrong?
You said you have the "firmware" upgrades but did you specifically purchase the DMR feature key? That is an additional $50 and you purchase it from the Uniden web site. The Uniden instructions: http://info.uniden.com/twiki/bin/view/U ... dioUpgrade

---

Author:	olowy [ Tue Oct 16, 2018 9:27 am ]
Post subject:	Re: Help - what am I doing wrong?
I did purchase the dmr update

---

Author:	nickcarr [ Tue Oct 16, 2018 4:47 pm ]
Post subject:	Re: Help - what am I doing wrong?
Have you ever confirmed that DMR is working on the 436HP? Try programming the TRBOWest system to verify it's working...

---

Author:	olowy [ Thu Oct 18, 2018 11:07 am ]
Post subject:	Re: Help - what am I doing wrong?
Will do and report back

---

Author:	olowy [ Tue Oct 23, 2018 9:43 am ]
Post subject:	Re: Help - what am I doing wrong?
Trbowest coming in loud and clear

---

Author:	olowy [ Tue Oct 23, 2018 10:38 am ]
Post subject:	Re: Help - what am I doing wrong?
Although I first programmed it directly into the scanner. I may try doing it through the programming software to see if that does anything.

---

Page 1 of 1	All times are UTC - 8 hours
Copyright © 2013 Interceptradio.com