InterceptRadio.com Forums

Both the RS PRO106 and the new GRE PSR-310 are object oriented scanners.

WIN500 can be used to program both of these scanners.

My question is.... can The PRO106 be cloned into the GRE PSR-310 with the jumper cable hooked between
their programming jacks?

I realize the PRO106 is a digital capable scanner and the PSR-310 is analog but if there are only analog frequencies programmed into the PRO106 will I be able to clone them from the PRO106 to the PSR-310?

I am sure it can be done using WIN500 but it would be simpler just to clone if possible.

Thanks in advance for any input.

_________________
" SILENCE IS CONSENT "

Made to Government Specs:
1) Measured with a micrometer.
2) Marked with a chalk.
3) Cut with an axe.

Jim N7UAP - Bellingham, WA / InterceptRadio.com

I tried to do this today and when the cloning cable was connected between the PRO106 and the PSR-310 neither scanner would recognize then other.

Cloning can't be done by this method.

Will try by using WIN500.

_________________
" SILENCE IS CONSENT "

Made to Government Specs:
1) Measured with a micrometer.
2) Marked with a chalk.
3) Cut with an axe.

Jim N7UAP - Bellingham, WA / InterceptRadio.com